Difference between revisions of "Creating a Ubuntu KVM virtual machine on OpenVZ7 using prlctl"

From vpsget wiki
Jump to: navigation, search
 
(2 intermediate revisions by the same user not shown)
Line 31: Line 31:
 
If the following error appears:
 
If the following error appears:
 
<pre>Failed to start the VM: The %1 virtual network cannot be found. Try to choose another network. (Details: Network not found: no network with matching name 'Bridged')</pre>
 
<pre>Failed to start the VM: The %1 virtual network cannot be found. Try to choose another network. (Details: Network not found: no network with matching name 'Bridged')</pre>
then switch your network adapter to router mode by specifying the virtual machine ID in curly brackets :
+
then switch your network adapter to router mode by specifying the virtual machine ID in curly brackets<sup>2</sup>:
 
<pre>prlctl set {2c03f039-0441-4cf4-8e4c-bd859ccefcd9} --device-set net0 --type routed</pre>
 
<pre>prlctl set {2c03f039-0441-4cf4-8e4c-bd859ccefcd9} --device-set net0 --type routed</pre>
 
If the following error appears:
 
If the following error appears:
Line 40: Line 40:
 
Or:
 
Or:
 
<ul>
 
<ul>
<li>1. move the '''''iso''''' file to the '''''/tmp''''' folder</li>
+
<li>move the '''''iso''''' file to the '''''/tmp''''' folder</li>
<li>2. ''prlctl set Ubuntu_18-04 --device-del cdrom1 (if there are several '''''cdrom''''' drives, then delete them all)''</li>
+
<li>''prlctl set Ubuntu_18-04 --device-del cdrom1 (if there are several '''''cdrom''''' drives, then delete them all<sup>3</sup>)''</li>
<li>3. ''prlctl set Ubuntu_18-04 --device-add cdrom --image /tmp/Ubuntu_18-04.iso''</li>
+
<li>''prlctl set Ubuntu_18-04 --device-add cdrom --image /tmp/Ubuntu_18-04.iso''</li>
 
</ul>
 
</ul>
 
Now you need to connect to the hypervisor via the VNC Viewer, specifying its IP address and VNC port, which we set earlier. Install Ubuntu using the standard installer.
 
Now you need to connect to the hypervisor via the VNC Viewer, specifying its IP address and VNC port, which we set earlier. Install Ubuntu using the standard installer.
Line 48: Line 48:
 
<pre>No bootable device</pre>
 
<pre>No bootable device</pre>
 
Most likely your iso file is not bootable. Just change it to another.
 
Most likely your iso file is not bootable. Just change it to another.
If the Ubuntu installer does not see the hard disk (virtual), then stop the virtual machine and run the following command 2:
+
If the Ubuntu installer does not see the hard disk (virtual), then stop the virtual machine and run the following command<sup>2</sup>:
 
<pre>prlctl set Ubuntu_18-04 --device-set hdd0 --iface ide</pre>
 
<pre>prlctl set Ubuntu_18-04 --device-set hdd0 --iface ide</pre>
 
After installing Ubuntu, you can also install OVZ Guest Tools, by stopping the virtual machine before this:
 
After installing Ubuntu, you can also install OVZ Guest Tools, by stopping the virtual machine before this:
Line 55: Line 55:
 
<pre>prlctl set Ubuntu_18-04 --device-set net0 --adapter-type rtl</pre>
 
<pre>prlctl set Ubuntu_18-04 --device-set net0 --adapter-type rtl</pre>
 
This completes the creation of the Ubuntu virtual machine.
 
This completes the creation of the Ubuntu virtual machine.
 
+
<br />
 
+
<br />
<sup>1 </sup>You can get the list of available distributions using the prlctl set ve_name -d list command
+
<br />
 +
<hr width="900">
 +
<sup>1 </sup>You can get the list of available distributions using the ''prlctl set ve_name -d list'' command
 +
<p><sup>2 </sup>To find the virtual machine ID enter the command: ''prlctl list -a''
 +
<p><sup>3 </sup>To see the virtual machine configuration (eg device name), use the command: ''prlctl list Ubuntu_18-04 -i | grep Hardware -A15''

Latest revision as of 11:32, 14 July 2020

In this article, we describe the process of creating a Ubuntu virtual machine based on the OpenVZ 7 hypervisor with the KVM virtualization type. In our case, we will create a Ubuntu 18.04 (x64) virtual machine. Other Ubuntu virtual machines are created in the same way.


Create a virtual machine (use ubuntu as a distribution1 for Ubuntu 18.04):

prlctl create Ubuntu_18-04 --distribution ubuntu --vmtype vm

Create a virtual cdrom drive and mount the Ubuntu ISO image into it:

prlctl set Ubuntu_18-04 --device-add cdrom --image /root/downloads/Ubuntu_18-04.iso

Allow VNC access:

prlctl set Ubuntu_18-04 --vnc-mode manual --vnc-port 5910 --vnc-passwd YourPassword

Optionally, set a static MAC address:

prlctl set Ubuntu_18-04 --device-set net0 --mac 00:11:41:32:84:55

Set the IP address + CIDR, gateway and name server:

prlctl set Ubuntu_18-04  --device-set net0 --ipadd X.X.X.X/24 --gw X.X.X.X \
--nameserver 8.8.8.8

Set the number of virtual processor cores:

prlctl set Ubuntu_18-04 --cpus 2

Set the RAM size:

prlctl set Ubuntu_18-04 --memsize 4G

Set the size of the drive:

prlctl set Ubuntu_18-04 --diskspace 80G

Optionally, set the input/output limit (MB/s):

prlctl set Ubuntu_18-04 --iolimit 50

Optionally, set the autostart:

prlctl set Ubuntu_18-04 --autostart on

Run the created virtual machine:

prlctl start Ubuntu_18-04

If the following error appears:

Failed to start the VM: The %1 virtual network cannot be found. Try to choose another network. (Details: Network not found: no network with matching name 'Bridged')

then switch your network adapter to router mode by specifying the virtual machine ID in curly brackets2:

prlctl set {2c03f039-0441-4cf4-8e4c-bd859ccefcd9} --device-set net0 --type routed

If the following error appears:

Failed to start the VM: Operation failed. Failed to execute the operation. (Details: internal error: process exited while connecting to monitor: 2020-02-09T19:26:31.816008Z qemu-kvm: -drive file=/root/downloads/Ubuntu_18-04.iso,format=raw,if=none,id=drive-ide0-0-1,readonly=on,cache=none,discard=unmap,aio=native: Could not open '/root/downloads/Ubuntu_18-04.iso': Permission denied)

then change the permissions and the owner of the iso image file:

chown -R user:user /root/downloads/Ubuntu_18-04.iso
chmod 777 /root/downloads/Ubuntu_18-04.iso

Or:

  • move the iso file to the /tmp folder
  • prlctl set Ubuntu_18-04 --device-del cdrom1 (if there are several cdrom drives, then delete them all3)
  • prlctl set Ubuntu_18-04 --device-add cdrom --image /tmp/Ubuntu_18-04.iso

Now you need to connect to the hypervisor via the VNC Viewer, specifying its IP address and VNC port, which we set earlier. Install Ubuntu using the standard installer. If after connecting through the VNC you see the following error:

No bootable device

Most likely your iso file is not bootable. Just change it to another. If the Ubuntu installer does not see the hard disk (virtual), then stop the virtual machine and run the following command2:

prlctl set Ubuntu_18-04 --device-set hdd0 --iface ide

After installing Ubuntu, you can also install OVZ Guest Tools, by stopping the virtual machine before this:

prlctl installtools Ubuntu_18-04

If Ubuntu after installation on your virtual machine does not see the network adapter, stop the virtual machine and run the following command:

prlctl set Ubuntu_18-04 --device-set net0 --adapter-type rtl

This completes the creation of the Ubuntu virtual machine.



1 You can get the list of available distributions using the prlctl set ve_name -d list command

2 To find the virtual machine ID enter the command: prlctl list -a

3 To see the virtual machine configuration (eg device name), use the command: prlctl list Ubuntu_18-04 -i | grep Hardware -A15